55 Index,IndexFolder|Users,UsersFolder|Shared,SharedFolder|Template,TemplatesFolder|RADs,RADsFolder|Filters,FiltersFolder|Letters,LettersFolder|Forms,FormsFolder|Filing,FilingFolder|Archive,ArchiveFolder|Scanned Images,ScansFolder|Faxes,FaxesFolder|Publishing,PublishingFolder|Internet pages,URLsFolder|Work files,WorkFilesFolder|Mail-Merged,MailMergeFolder|Overlays,OverlaysFolder|Video and Voice,VideoVoiceFolder|New Contacts,NewContactsFolder|E-Mails,EMailsFolder|Tables,TablesFolder|Service calls,JobsFolder
56 |!50 Paths
57 10
58 9999
59 0
60 ú|1
61 1
100 The value in the Registry for |1 was either outside the valid range or missing, so the default value has been assumed.
101 The file\n\n"|1"\n\ncould not be located.
102 The error:\n\n|1\n\noccured while trying to create your new database.
103 The file\n\n"|1"\n\nalready exists. Do you want to overwrite it?
104 The database file:\n\n"|1"\n\ncould not be overwritten. It may be open in another program or on another machine.
105 The error:\n\n|1\n\noccured while trying to access drive |2.\n\nIf this is a CD or floppy drive, make sure you have a disk in the drive. If it is a network drive, make sure the computer is turned on.
106 The module file:\n\n"|1"\n\ncould not be started. It caused the error:\n\n|2.
107 Error
108 The database file:\n\n"|1"\n\ncould not be opened. It may already be open in another program or on another machine, but not by |!50.
109 Warning!
110 Please confirm
111 |!50 is unable to access the file which you have requested, probably because it is being updated by another user.\n|1\nDo you want to try to access the file again?
112 \nThe error which |!50 gives when trying to perform the desired operation on the file\n"|1"\n is '|2'.\n
113 The error:\n\n|1\n\noccured while trying to access the file:\n\n"|2"
114 |!50 is unable to create a temporary file in your designated Temporary directory ("|1").\n\nIf you can resolve this problem, do so now and click 'Retry' to try again, otherwise click 'Cancel'.\n\n(Clicking Cancel may result in the loss of unsaved data).
115 |!50 has attempted to delete a file on your system but has been unsuccessful. You could try to delete this file manually and then continue by clicking 'Retry'.\n|1\nDo you want to try to delete the file again?
116 |!50 has attempted to copy a file but has been unsuccessful. You could try to copy this file manually and then continue by clicking 'Retry'.\n|1\nDo you want to try to copy the file again?
117 The key which you just pressed is not a hot-key.
118 Note:
119 Saving...
120 |!50 has attempted to access the file:\n\n"|1"\n\n but was unsuccessful. If |!50 was attempting to save data, any changes which you made may have been lost.
121 |!50 was unable to create the folder:\n\n"|1"\n\nCheck that you have free disk space on this drive, and access rights to create new folders.
122 An unexpected system error has occured.\n\nIf the problem persists, contact your vendor quoting this reference:\n"|1"
123 |!50 has attempted to rename a file on your system but has been unsuccessful. You could try to rename this file manually and then continue by clicking 'Retry'.\n|1\nDo you want to try to rename the file again?
124 \nThe error which |!50 gives when trying to rename\n"|1"\n as\n"|2"\n is '|3'.\n
125 Module not found:
126 Unable to continue
127 |!50 has attempted to delete a folder on your system but has been unsuccessful. You could try to delete this folder manually and then continue by clicking 'Retry'.\n|1\nDo you want to try to delete the folder again?
128 The file\n\n"|1"\n\nwas locked and unaccessible. This error may be caused if the file is currently open.\n\nIf you can close the file, do so now and click 'Retry', otherwise click 'Cancel' to abort this operation.
129 |!50 cannot open this item because there is no viewer associated with "|1" files in Windows Explorer.
130 There are no paths set on this machine.
131 You must choose one of the path settings when you log on to |!50. The program will now close.
132 This program will now close. You must open |!50 and specify valid paths for your system files and data folders in the Setup window, and then log on using those settings.
133 You have not created a valid set of paths. Do you want to try again?
134 The following path could not be accessed:\n\n"|1"\n\nIf this is a path to another machine, check that it is turned on, connected to the network, and that you have a valid connection to it through Windows Explorer.
135 A required path is missing from the '|1' settings.
136 Do you want to change the current setting now?\n\nIf you choose |í402, the Setup window will appear and you should check the '|1' path. Otherwise, the program will terminate.
137 This path has not been set
138 File in use
139 This folder is empty.
140 This folder contains...This folder is empty.
400 &OK
401 &Cancel
402 &Yes
403 &No
404 &Default
405 &Quit
406 Save the changes which you have made?
407 &Add
408 D&elete
409 &Replace
410 A&pply now
411 &Undo
412 S&top
413 &Start
414 C&lose
415 &Browse...
416 &New
417 &Save
418 &Edit
419 &View
420 &Next
421 &Back
422 &Properties
500 Workstation or Docked
501 This module requires data which is not present in the current folder.
504 (c)=⌐|1/2=╜|1/4=╝|3/4=╛|(r)=«|(tm)="!|alot=a lot|avg=average|bve=be|im=i'm|mpg=Miles per Gallon|qty=quantity|reccommend=recommend|reccomend=recommend|rythm=rhythm|sincerly=sincerely|sucess=success|tghe=the|thgis=this|thats=that's|truely=truly|useing=using
505 {\fonttbl{\f0\fnil MS Sans Serif;}{\f1\fnil\fcharset2 Symbol;}{\f2\fnil Courier New;}{\f3\fnil Arial;}}
509 The folder which you are about to create exceeds the Windows limit of |1 characters. The folder will not be formed.
510 The folder which you are about to create is longer than Windows allows (|1 characters).\n\nDo you want |!50 to automatically shorten the folder name to a legal length, and call it\n"|2"?\n(Clicking 'No' will cancel the operation)
511 Any new folders which you create in this branch may have their names shortened so that Windows can create them.\n\n(There is a limit of |1 characters for a folder path, and your new folder path will be at least |2 characters long.)
533 (none)= |\B1, 2, 3, 4, 5,\b...=1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20|\Ba, b, c, d, e,\b...=a,b,c,d,e,f,g,h,i,j,k,l,m,n,o,p,q,r,s,t|\BA, B, C, D, E,\b...=A,B,C,D,E,F,G,H,I,J,K,L,M,N,O,P,Q,R,S,T|\Bi, ii, iii, iv, v,\b...=i,ii,iii,iv,v,vi,vii,viii,ix,x,xi,xii,xiii,xiv,xv,xvi,xvii,xviii,xix,xx
534 Received |1 of data...
535 The folder '|1' does not exist or is not available.The host '|2' could not be found - check the name.The user name '|3' was rejected by the server.The password is not correct.
539 (none)
540 |1 is active
545 I can't edit this text once it has been AutoTyped
546 I can edit this text once it has been AutoTyped
547 Carriage Return after AutoTyping
549 (ignore)
551 Labelling:
552 Floatover|Key date #1|Key date #2|Key date #3
553 Colours: Background, Active, Inactive
554 An error occured while trying to create a thumbnail of the current image called\n"|1"\n\n
563 New Folder
564 Create a new folder in "|1"
565 MB,KB,bytes
566 If you create a new Company folder in this branch, any Contacts for that company may have their names shortened so that Windows can create them.\n\n(There is a limit of |1 characters for a folder path, and your new Company & Contact folder paths will be at least |2 characters long.)
567 You cannot create a new new folder in this branch, because it would exceed the Windows limit of |1 characters for a folder name.\n\n(If you want to create a new folder in this branch, you will need to shorten some of the folder names earlier on in the branch.)
568 If you create a new Company folder in this branch, you will not be able to create Contact folders for that Company due to a restriction by Windows on the maximum folder length of |1 characters.
571 <!DOCTYPE HTML PUBLIC "-//Apt Projects Ltd//DTD HTML 4.0 Transitional//EN"><HTML><BODY>
572 </BODY></HTML>
700 The file "|1" is not a valid |!50 file, or it may be corrupted and should be deleted so that |!50 can recreate it.\n\nDo you want to delete it now?
701 The file "|1" is not compatible with this version of |!50.\n\nIf you have recently upgraded to a newer version of |!50, you should consult the documentation or internet support for details of how to upgrade all your files in one process.\n\n(File is v|2, |!50 expects v|3)
702 The file "|1" is not a valid |!50 Profile file, or it may be corrupted.
703 |!50 could not create the following file:\n\n"|1"
704 An error occured while trying to create a new event, and the event may not have been recorded correctly in '|1'.
705 The file "|1" is not a valid |!50 Event file, or it may be corrupted.
706 Company called " B|1 b" n(|2)
707 Contact called " B|1 b" at |2 n(|3)
708 Contact called " B|1 b" n(|2)
709 Full nameTitlePositionDearCommentsUser defined 1User defined 2User defined 3User defined 4User defined 5AssistantBirthdayAnniversaryHobbiesSpouseChildrenFirst contact
710 Company nameCommentsUser defined 1User defined 2User defined 3User defined 4User defined 5
711 BuildingRoadDistrictTownCountyPostcodeCountry
712 House nameRoadDistrictTownCountyPostcodeCountry
713 Received fromAttention ofDate sentDate receivedUser defined 1User defined 2User defined 3
717 The file "|1" is not a valid |!50 Structures file, or it may be corrupted.
718 Folder for B|1 b at |2 n(|3)
719 The file "|1" is not a valid |!50 International database file, or it may be corrupted.
720 The file "|1" is not a valid |!50 Diary file, or it may be corrupted.
721 Creating a Diary file...
722 Unable to create a Diary file called\n"|1".\n\n|!50 cannot function without this file and will now terminate.\n\nYou must remedy this problem before you can use |!50 again.
723 You installed |!50, and your life changed for the better!
724 Creating a Share file...
725 Unable to create a Share file called\n"|1".\n\n|!50 cannot function without this file and will now terminate.\n\nYou must remedy this problem before you can use |!50 again.
726 Administrator
727 Head OfficeMain switchboardReception
728 You must specify your current geographical location in the |!50 Setup window before you can continue.\n\nSetup will now be displayed - please enter your Country code and Area code in the boxes provided, then choose '|í400' to continue.
729 You cannot continue until you have specified your current location in the |!50 Setup window.
730 The file "|1" is not a valid |!50 Share Info file, or it may be corrupted.
731 Sent toAuthored byDate createdDate sentUser defined 1User defined 2User defined 3
732 Authored byDate created User defined 1User defined 2User defined 3
733 This document ("|1") does not appear to be the correct format of file. Mail Merge documents must be stored as rich text files (RTF), so you should check that this document has been saved with rich text content and not just renamed to an RTF file.\n\nThe Mail Merge cannot continue with this document.
734 B|1 b at B|2 b n(|3)
735 House nameRoadDistrictTownCountyPostcodeCountry
736 Family nameCommentsUser defined 1User defined 2User defined 3User defined 4User defined 5
737 B|1 b on B|2 b n(|3)
738 The file "|1" is not a valid |!50 Index file, or it may be corrupted.
739 |!738 You cannot proceed into |!50 until it has been rebuilt.\n\nIf you continue the Index will be rebuilt, otherwise click cancel to quit.
740 Creating an Index file...
741 Unable to create an Index file called\n"|1".\n\n|!50 cannot function without this file and will now terminate.\n\nYou must remedy this problem before you can use |!50 again.
742 Invalid locale reference: |1
743 |1, |2
744 All of |1
745 An error occured while trying to create a new Diary entry, and the entry may not have been recorded correctly.
746 Don't know the exact locale
747 Don't know this area code
748 You are trying to add an entry into the diary for |1, but the diary only supports dates between |2 and |3. This new entry will not be added to the diary.
749 The file "|1" is not a valid |!50 To-Do file, or it may be corrupted.
750 You are not registered as a user who can access the postal address file. Check the list of authorised users in Setup - Rapid Addressing or ask your system administrator to add you to the list or authorised users.
751 MakeModelSerial no.Purchase dateWarrantyExpiresUser defined 1User defined 2User defined 3User defined 4User defined 5
752 Assets
753 Contractor Valid fromExpires onUser defined 1User defined 2User defined 3
754 |1 hrs, |2 mins
755 HardwareSoftwareSalesAdministration
756 |!50 cannot find the postal address file!\n\nIf you have purchased this optional database file, make sure it has been installed into '|1'.
762 An error occured while creating a Mail Merge document.
763 Create a new Mail Merge Document
764 No preview available.
765 You have chosen the option to create a new Mail Merge document.\n\nClick '|í400' to continue.\n\nIn this version of |!50 you are limited to a maximum of |1 Mail Merge documents, and you currently have |2.
769 Cannot continue with this operation because |!50 was unable to create a required Mail Merge file called '|1'.
770 {\rtf1\ansi\ansicpg1252\uc1\deff0{\fonttbl{\f0\froman\fcharset0\fprq2 Times New Roman;}}\pard\plain\fs20\ {\field{\*\fldinst {DATA "|1" }}}{\info{\keywords DO NOT EDIT! [|8]}}{\field{\*\fldinst { MERGEFIELD |2 }}}{\par\par}{\field{\*\fldinst { MERGEFIELD |7 }}}{\par\par\par Dear }{\field{\*\fldinst { MERGEFIELD |3 }}}{ }{\field{\*\fldinst { MERGEFIELD |4 }}}{,\par\par This is a sample letter to get you started. You can replace this text with your own words, or more experienced users can create a new document from scratch. In this case, you will require the Mail Merge field data which is stored in '|5'.\par\par Yours sincerely,\par\par\par {\field{\*\fldinst { MERGEFIELD |6 }}}}}
771 |!50 has created the Mail Merge document called '|1' in '|2'.\n\nYou can now go ahead and edit it using your preferred Word Processor.
772 This version of |!50 limits you to a maximum of |1 Mail Merge documents, and you currently have |2.\n\nThe list will be restricted to the first |1 documents in the Letters folder.
773 B|1 b
774 The file "|1" is not a valid |!50 Form file, or it may be corrupted.
775 Phone numberFax numberE-Mail address
776 The file "|1" is not a valid |!50 Details file, or it may be corrupted.
777 |!50 cannot locate your Details file ("|1"), which stores the layout and configuration of the fields in your database. This file cannot be recreated automatically. If you have a backup version of the file, you should restore it, otherwise you must use the Details file supplied on the |!50 CD.
778 AnnotationAuthored byTarget folder
779 Saving '|1', |2% complete...
780 The file "|1" is not a valid |!50 Table file, or it may be corrupted.
781 Reading '|1', |2% complete...
782 Saving the table was interrupted and no data has been saved to file.
783 This document is larger than 20k and may take a while to open - do you want to see a preview of it anyway?
784 The file "|1" is not a valid |!50 Rapid Addressing Database file, or it may be corrupted.
900 Find information
901 Search for:|Refine:
902 Look in:
903 Start search
904 General|Rebuild
905 Indexing Properties
906 Rebuild
907 |!50 has found over |1 matches for '|2', and is only part way through the index. The search can continue if you wish, but it would be quicker if you provided a more precise search clue.\n\nDo you want to continue with the search?
908 Interrupt search
909 Performing tasks...
910 Found |1 hit(s). Search time: |2s Traffic: |3
911 Copying '|1'...
912 No matches found.
913 |1 folders indexed at |2 per second.
914 The '|1' index is undergoing maintenance by the Administrator and cannot be accessed at this time. Try again later.
915 This holds the |1 most recent search hits.
916 &Remove
917 &Clear
918 Are you sure that you want to remove all the entries from the list below?
919 To add an entry to the Favourites list:\n ╖ Perform a search as normal\n ╖ Right-click on the Contact you want to add\n ╖ Choose '|í2260' from the menu which appears
920 |!50 was unable to save your new contact data due to an unexpected error.
921 BReady to search b nClick ' B|í416 b' to create a new item
922 Address
923 New Contact details
924 Create
925 Contact point |1
926 The new contact could not be created because the path specified could not be accessed.\n\nThe path is set to:\n"|1"
1002 Are you sure that you want to delete the template "|1" ?
1003 Unused. Click the button to set the activity.
1004 The Template buttons will not do anything at this time.
1005 The Template file\n\n"|1"\n\ncannot be opened because is was not created with the same version of |!50 as you are using.
1006 The file\n\n"|1"\n\nis not a valid |!50 Template file and will be ignored.
1007 Click here to see all the messages on this strip
1008 Context|Templates
1009 Do you want to save the new template configuration for '|1'?
1050 Fax using Delrina« WinFax«
1051 Send to|Cover page|Attachments|Setup|Status
1052 Send with a Cover page
1053 Send with Attachments
1054 &Send
1055 Send to these recipients:
1056 Print using this WinFax« driver:
1057 No printers installed
1058 An error occured while trying to talk to Delrina« WinFax«. You require WinFax« version 9.0 or a later version.\n\nThe error was: "|1"
1059 Did WinFax« send the fax correctly?\n\n(Please wait until you see some activity in WinFax« before responding - this may take up to a minute)
1060 &Yes (Close)
1061 &No (Resubmit)
1062 WinFax« returned an error when '|1' (fax number |2) was added to the list of recipients.\n\nDo you wish to continue?
1063 The fax cannot be sent because there are no recipients. Make sure that you have ticked at least one fax number in the recipient list.
1064 BStandardbt(200x100)|BFinebt(200x200)
1065 Send faxes at this resolution:
1066 No items found
1067 Send a quick cover page|Send using this cover page:
1068 You have chosen to send a cover page, but you have not chosen one from the list.\n\nDo you want to continue, and send the fax without a cover page?
1069 Type the message for your cover page here
1070 (Click to load all available choices)
1071 Type the subject of your fax here
1072 Keep a copy of the fax in WinFax«
1073 Send these attachments:
1074 You have chosen to send attachments, but you have not chosen any from the list.\n\nDo you want to continue, and send the fax without any attachments?
1075 WinFax« returned an error when '|1' was added to the list of attachments.\n\nDo you wish to continue?
1076 (Not applicable)
1077 You have not selected a printer in the Setup tab, so faxing cannot be performed.
1078 Send faxes immediately|Send faxes to the WinFax« out box|Send faxes for off-peak transmittal
1200 Details
2021 Open
2022 Hot-key
2023 Open Maximised
2040 About
2041 Tweak user interface
2042 Setup
2044 Visit our Web site
2045 File versions
2046 Program reset
2047 Backup / Restore
2062 Open (Incoming call)
2100 Call now
2101 Folder properties
2102 Properties
2103 View folder as a diary
2104 Open / Close
2105 Delete
2106 Publish to the net
2107 Relocate (Cut)
2108 Relocate here (Paste)
2109 Refresh
2110 Rebuild Summary
2111 Write a letter
2112 AutoFile
2113 Write an e-mail
2114 Send to table
2140 Muddle
2141 Picture...
2142 Clue
2143 Animate tiles
2160 New Company
2161 Remove
2162 View / Modify
2163 Call now
2164 Show Events
2165 Hide Events
2166 Properties
2180 Get
2181 Delete
2182 Reply
2183 Add Subject to AutoDelete
2184 Add Sender to AutoDelete
2185 Forward
2186 Delete
2187 Schedule a call-back
2188 Send again
2200 Find...
2201 Defragment...
2202 Rebuild Index file
2221 Delete address
2222 Edit context
2223 View
2240 New Template
2241 Properties
2242 Activate
2243 Templates...
2244 (no Templates)
2260 Send to Favourites
2261 Receive call
2262 Select
2280 Close now
2281 Comment
2340 Fit to screen
2341 Fit to width
2342 Open / Close
2343 Scroll Horizontally
2344 Scroll Vertically
2345 Page number position
2346 Create Thumbnail
2347 AutoThumbnails
2348 Link
2360 Open (Outgoing call)
2380 Send Now
2381 (Send All)
2382 Get
2383 (Get All)
2384 Delete
2385 Reply
2386 Forward
2400 New Include...
2401 Purge
2420 Copy
2421 Paste
2422 Delete
2423 Bring to front
2424 Send to back
2440 Insert column(s)
2441 Delete column(s)
2442 Clear contents
2443 Format column...
2444 Sort (ascending)
2445 Sort (descending)
2446 Rename column
2447 Copy
2448 Cut
2449 Paste
2450 Auto-size
2451 Refresh
2452 Refresh whole table
2460 Cut
2461 Copy
2462 Paste
2463 Allocate to...
2464 Insert row(s)
2465 Delete row(s)
2466 Refresh
2480 New appointment
2481 New recurring appointment
2482 Go to today
2483 Go to...
2484 Go to |1
2485 Delete
2486 Delegate to...
2487 Edit
2488 Change to all-day appointment
2489 Untick
5000 Total Contact Management
5001 &OK
5002 Version |3\n⌐1997-2001 Apt Projects Ltd.\nwww.aptprojects.com\n\nThis product is licenced to:\n|1 |2
5003 * No user *
5004 + Workflow System
5005 Y
5010 Double-click to log-off
5011 Welcome to |!50!
5012 Cancel request acknowledged.
5013 Filing system10
5014 Incoming call06
5015 Outgoing call05
5016 Diary12
5017 E-Mail11
5018 Tables03
5019 Website administration08
5020 To-Do list01
5021 Search09
5022 On-hold puzzle04
5023 Template Trainer07
5050 Press F1 for Help
5051 Unable to find the Voice Help file named:\n\n"|1"
5052 Line |1
5054 The requested |!50 module could not be located, and may not be installed.\n\nIf the file "|1" is not located in the "|2" folder, you should move it there and then try again.\n\nIf you do not have the file "|1" on your system, you can buy it on-line from our Internet store at |!51
5055 New Contact00
5056 http://www.aptprojects.com/techhigh.htm
5057 Free: |1% Forms: |2
5058 This is a time-limited version of |!50. It will automatically close after 45 minutes of use, but in all other respects it is the same as the commercially available version.\n\nFor ordering information, visit our web site:\n|!51
5059 Thankyou for evaluating our product!\n\nYour evaluation time for using |!50 has now ended, and the program will close. To continue evaluating the program, you must restart it.\n\nFor ordering information, visit our web site:\n|!51
5060 A setting on your computer has been detected which may have a detremental effect the performance of |!50.\n\nPlease inform your system administrator that the 'True Commit' option is set to 'On', and |!50 requires the default setting of 'Off'.
5061 There is no picture help available for this part of the program.
5062 Show:
5063 There are |1 task(s) outstanding which |!50 hasn't had chance to finish. If you close |!50 now, they will be processed next time you use the program.\n\nComplete unfinished tasks now?
5064 Background processing
5065 There are |1 task(s) outstanding on this machine. When |!50 detects that your computer is idle it will process these tasks in the background.\n\nDo you want |!50 to process them now, rather than wait for idle time?
5066 There are no tasks outstanding on this machine.
5306 Free1Pencilled-in2Busy3Doing work4Travel time5Out of office6
5307 (|1 hour)(|1 hours)
5308 Note: This event occurs in the past.
5309 BPublicbt(visible to everyone)1
5310 Every dayEvery |1 daysEvery working day (|2)
5311 Every week...Every |1 weeks......on a |2
5312 Every month...Every |1 months......on day |2...on the |3 - |4
5313 Every year...Every |1 years......on |2...on the |3 - |4in |5
5314 Create a recurring |1 starting from |2
5315 This is a recurring event.
5316 first1second2third3fourth4last5
5317 End after |1 occurrencesEnd by |2
5318 (last entry will be around |1)
5319 (last entry will be no later than |1)
5320 Some months do not have |1 days - if you continue, the appointment will be written on the last day of the month if the month has fewer than |1 days.\n\nDo you want to continue?
5321 In years where February only has 28 days, the appointment will be written on the 28th instead of the 29th.\n\nDo you want to continue?
5322 To-Do properties
5323 Type:With:Message:Due by:Reminders:for:Privacy:Status:% done:Time spent so far:hoursminutes
5324 Not yet started0In progress1Waiting on someone else2Done3
5325 |1 has |2 days |3 hours left to do this task|1 has |3 hours left to do this taskThis task is |3 hours overdueThis task is |2 days overdue|1 has |2 days left to do this task
5400 Publish to the internet
5401 B|1b (Custom form)
5402 Publish files to a new sub-folder...including attachments (documents, scanned images etc.)Publish in |1 formatPublish selected branch onlyPublish selected branch and all sub-foldersSend to the Internet Publishing pending traySend directly to the internet...using|2
5403 Source: '|1'
5404 Files will be published to: |1
5405 The destination is invalid. Check your settings.
5406 Destination:
5407 Publishing |1...\n|2% complete
5408 There are no files in the specified folder.
5409 Uploading |5 : |1 out of |2 transferred\nTime to go: |3m |4s
5410 Upload complete.
5411 Uploading |1
5412 Transaction log:
5414 Rebuilding the index page...
5650 Unlinking...
5651 Go to B|1b
5652 Auto-linking...
5653 Auto-linking '|1' into '|2'...
5654 Auto-linked |1 of |2 document(s)
5655 Some items are still linked to this folder. Possible reasons are:\n\n- They are historic events such as phonecalls or e-mails, which cannot be unlinked\n- Not all of the attachments to the event could be unlinked, possibly because they are open by another user.
5657 Printing...
5658 \fs24\b Marker page\b0\fs20\pard\par |!50 doesn't support the printing of this item. You must print it manually and insert it into the portfolio at this point.\par\par\par |1\par\par (This is a \b |2\b0 )
5659 |1 made a call to |2 on |3 at |4|1 received a call from |2 on |3 at |4
5660 |1 wrote a letter to |2 on |3 at |4|1 received a letter from |2 on |3 at |4
5661 |1 sent an e-mail to |2 on |3 at |4|1 received an e-mail from |2 on |3 at |4
5663 Are you sure that you want to delete the |1 selected file(s)?
5700 Filing System
5701 Searching for folders in |1...
5702 Creating tree...
5703 There are no linkable items in the current folder.
5704 Loading...
5705 New folder in "|1"
5706 Preparing to relocate...
5707 |1 file
5708 There are |1 folder(s) out of |2 which would exceed the maximum folder length permitted by Windows if you moved them into the '|3' folder.\n\nIf you choose to continue by clicking 'OK', |!50 will move as many folders as it can and leave the ones which would be too long.
5720 Unable to create a thumbnail for this image.\n\nThumbnails are stored in the same folders as the source images, and this image is currently stored on a read-only medium.
5722 (Root)
5724 Move to *B|1*b folder*n(|2)
5725 Copy to *B|1*b folder*n(|2)
5726 Shortcut to *B|1*b folder*n(|2)
5730 Linking completed successfully.
5731 Properties
5732 This folder is empty.
5733 Includes contents of "|1"
5734 You must select a folder from the Filing list before activating the Folder Wizard.\n\nThe folder which you select will then be the root for any new folders create by the Wizard.
5736 Are you sure that you want to delete the folder "|1" and all files and folders within this folder?
5737 This folder has now been deleted. If it reappears in the tree, it is because it contains files or folders which could not be removed.
5739 Scanning Wizard
5740 Auto-link
5741 Pending options
5742 |!50 has detected one or more log file(s) in this folder.\n\nWould you like |!50 to select the faxes which were successfully sent, according to the data in these log files?
5743 Link
5744 Linking options
5745 Processing log files...
5746 You can add a note to all the items which you are about to auto-link. The note will be added to the beginning of any existing annotation. Leave the box empty if you don't want to add a note.
5747 Unlink
5748 Additional annotation
5749 The |1 unlinked file(s) will be returned to the Work Files pending folder ready for you to re-link them. Any notes or annotations made in |!50 concerning the files will be LOST.\n\nAre you sure you want to continue?
5750 You cannot return linked items to the Work Files pending folder because a path has not been specified for it.
5751 Filing Tree00
5752 Archive01
5753 Pending trays02
5754 New Normal (general-purpose) folder03
5755 New Company folder04
5756 New Family folder05
5757 New Contact folder06
5758 Include within this folder the contents of...07
5812 Press the key combination which you want to use to |1.\n\nIf this key combination is not currently assigned, it will be used.
5813 activate this Taskbar item
5814 This key combination is already assigned.\n\nClick '|í5815' to re-assign it, or select a different key combination.
5815 &Update
5816 |!50 was unable to name your folder as requested, and instead has formed a folder with the shorter name "|1".
5817 Select the types of files which you want to back-up...
5818 Defragmentation
5819 This folder...
5820 Print Options
5821 Print
5822 F1 and Shift-F1 are reserved for the |!50 Help system and cannot be re-assigned.
5823 Defragmenting your files will save disc space and increase speed.\nSelect the file which you want to defragment:
5824 Tomorrow (|1)
5825 Index|Diary|Shared
5826 Later on today
5827 Analyse
5828 Click '|!5827' to see if the |1 file is fragmented.
5829 The defragmentation routine is not compatible with the |1 file. Defragmentation will not take place.\n\nThis error should not occur in a release version of |!50 - notify the programming team immediately.
5831 &Diary
5832 |1 bytes,Used,Reserved,Wasted,Read
5833 The |1 file is |2% fragmented and should be defragmented. Click '|í413' to begin.
5834 The |1 file is only |2% fragmented. Click '|í413' if you still want to defragment it.
5835 The |1 file is |2% fragmented and cannot be reorganised any more efficiently.
5836 AutoFile
5837 This will move all Contact, Company and Family folders from the source folder into the target folders, based on the names of the source folders.
5838 Video help
5839 Source|Target
5840 There are no addresses in the database.
5841 Dear |1,
5842 File Versions
5843 File\tVer\tBuild
5844 Diary file|Index file|Contact details file|Template file|Event file|Folder info file
5845 Browse for a folder...
5846 The |1 file could not be accessed and so no analysis is available.
5847 Field properties
5848 Prompt:
5849 Rebuild System Files
5850 Drop-list contents:
5851 Rebuilding |1...
5852 Searching for folders...
5853 The selected system files have successfully been rebuilt.
5854 Select the files which you want to rebuild, and then click '|í413' to begin.
5855 System Reset
5856 Delete all Company and Contact profiles|Delete all FileInfo files|Delete all Event files|Delete all QuickLoad files|Delete all Templates|Delete Index file|Delete Diary file|Delete Products database file|Reset Tweaks to default values|Reset Registry to default values
5857 ...for \B|1\bs is
5858 ...to...
5859 As-you-type hints:
5869 ABCDEFGHIJKLMNOPQRSTUVWXYZ1234567890
5870 Unspecified \0(will be ignored)
5871 There are no folders in the source ('|1') which can be AutoFiled, or the source may be empty.\n\nFolders must be either Company, Contact or Family folders.
5872 The |1 file is now |2, reduced from |3 due to better organisation.
5873 Defragmentation cannot continue because |!50 is unable to create a new temporary |1 file called "|2".
5874 |!50 was unable to replace your old |1 file with the newly defragmented file.\n\nThe new |1 file is called "|2" and you can manually replace your old |1 file with this new file if you wish.
5875 Possible addresses for |1:
5876 The list below shows all the addresses which share the postcode |1. Select one to close this window.
5877 Select the types of files which you want to restore...
5878 BUser filesbt(Diaries, E-Mails etc.)|BSharedb file|BTemplatesb|BIndexb file|BLettersbt(Mail-Merge source docs)|BFiltersb|BAll data filesbt(Events, images, documents etc.)|BEvents onlybt(Notes and annotations)|BContact details onlybt(Company & Contact details)|BFile info onlybt(System information files)|BWork Filesbt(Pending tray)|BFaxesbt(Pending tray)|BScanned imagesbt(Pending tray)|BE-Mailsbt(Pending tray)|BMail-Mergedbt(Pending tray)|BURLsbt(Pending tray)|BVideo & Voicebt(Pending tray)
5879 Back up the data into:
5880 Restore using the data from:
5881 Working in '|1'...
5882 Back up / Restore operation complete.\n\nFailed to copy |1 folder(s), plus |2 file(s), either because they were in use, invalid, too long, or because of limited disc space.
5883 Index file
5884 Create letter in:
5885 Use the Microsoft« Word« Letter Wizard (if available)
5886 Use this Mail-Merge document:
5887 Write a letter to |1
5888 An error occured while trying to open Microsoft« Word«. You require Word«97 or a later version, and a valid installation of the associated Word« Letter Wizard.\n\nThe error was: "|1"
5892 Settings|Print marker pages for unsupported items|MarkerPages|CHK|-1|-1|Print in reverse order (most-recent event first)|ReverseOrder|CHK|0|-1
5893 Continuity|Print Phonecalls on separate pages|PFBeforePhonecall|CHK|0|-1|Print Letters on separate pages|PFBeforeLetter|CHK|-1|-1|Print E-Mails on separate pages|PFBeforeEMail|CHK|0|0|Print Images on separate pages|PFBeforeImage|FIX|-1|-1
5894 The target folder for your backup must have a shorter name than the source in order to guarantee that the maximum path name length will not be exceeded.\n\nYou must specify a target folder which is |1 characters or less in length, including the drive letter. (Your current folder, "|2" is |3 characters)
5895 Press Escape to interrupt / cancel
5896 Are you sure that you want to delete the Mail Merge document called "|1" ?
5897 Folder for |1Pending tray (|2)
5898 Are you sure that you want to stop?
5899 |1 available on drive |2
5900 Database Validation
5901 This will interrogate your database, looking for bad filing references, empty files and other errors.\n\nIf you interrupt the process, it may take several minutes to stop while it comes to the end of a cycle. Do NOT terminate the program using Ctrl-Alt-Del.
5902 Analyse the database and report|Ask before fixing errors|Automatically fix errors
5903 There are two folders with the same reference number:\n\n|1\n and\n|2\n\nIf you choose to fix this problem, |!50 will re-number the '|3' folder because it contains fewer (or no) sub-folders.
5904 Data validation is complete.
5905 This folder's reference number does not follow on from its parent folder:\n\n'|1', a sub-folder of '|3',\nshould have a |4-part reference number beginning with '[|2-...' .\n\nIf you choose to fix this problem, |!50 will re-number this folder so that it follows the correct lineage of numbering.
5906 The folder '|1' has a problem with the format of its reference number.\n\nIf you choose to fix this problem, |!50 will attempt to correct the reference number.
5907 Data validation will stop as soon as possible.\n\nPlease wait...
5908 Fix this problem now?
5909 A report has been compiled and is called '|1'.\nWould you like to open it now?
5910 The file '|1' exists but can't be opened for validation.
5911 The file '|1' is not a valid |2 file. It is probably corrupted or empty.
5912 The file '|1' is the wrong version. It is verion |2 but |!50 expects version |3.
5913 You cannot publish folders to the internet because you do not have a path set for storing the internet pages which |!50 will produce.\n\nTo set a path for publishing web pages, use the 'Internet publishing' element of the Setup window.\n\nTo access Setup, click the '|!5100' menu and choose '|í8200'.
5914 The file '|1' does not contain the marker '|2' which you specified.\n\nCheck the file to make sure that the marker is present before tying again.
5976 Note: This address will also be removed from the work addresses of all the contacts at '|1' if you delete it.
5977 Are you sure that you want to delete the selected number?
5978 (no comment)
5979 \1<New Item>\0
5980 Enter the new item which you want to add to the '|1' list.
5981 New Item...
5982 Unable to form a new folder for '|1' because it will exceed with Windows limit of |2 characters.\n\n|!50 has attempted to shorten the folder names to accomodate this folder, but it is still too long.\n\n|!50 will attempt to save your other details, but this folder will not be created and the details for it will be lost.
5983 '...\|1' becomes '...\|2'
5984 The following folders had to be shortened in order to create them. These are the changes:\n\n|1
5985 Family houses and phone numbers:
5986 <New Family>
5987 At Home|At Work|Assets
5988 Enter the name of the new asset category:|New asset category
5989 Types of assets:
5990 <New |1>
5991 Copy details from...
6300 Call
6301 Incoming Call
6302 Outgoing Call
6303 |!50 is unable to save the changes which you have just made to the Template because the file could not be accessed.\n\nThe changes are only being held temporarily. When you close the Call window they will be lost, unless you edit the Template again and it saves the changes successfully in which case all changes will be saved.
6304 There is already a call in progress.\n\nDo you want to close and save the current call, and then open this new call?
6307 You still have calls in progress.\n\nIf you close the Call window, you will lose any notes which you have made for the calls in progress.\n\nAre you sure you want to close the Call window?
6308 Contact detailsSummary of details
6309 Hang Up
6313 b(A representative of) B|1
6314 Connect
6315 Outgoing|Notes
6316 free line
6317 On hook
6318 Ringing
6319 Speaking
6320 Finished
6321 On hold
6322 A.R.S.
6323 Ready to dial
6331 Called |1 re: |3
6332 Received a call from |1 re: |3
6333 Called |1 at |2 re: |3
6334 Received a call from |1 at |2 re: |3
6335 Unable to access the notes for this event.
6336 Wrote a letter to |1
6337 Wrote a letter to |1 at |2
6340 Font colour,COLOUR
6341 Bold,BOLD
6342 Italic,ITAL
6343 Underline,UNDER
6344 Start the call,CONNECT
6345 End / Save the call,HANGUP
6346 Schedule a return call,CALLBACK
6347 Templates,TEMPLATES
6348 Forecaster,FORECAST
6349 Save the call,SAVE
6350 Customer Service Management,HAMMER
6351 Schedule a to-do task,TODO
6500 Diary
6531 To-Do listActivity log
6532 1Double-click here to add a to-do
6533 |1s, |2
6534 Week |1
6535 Go to: |1
6536 End: |1 Duration: |2:|3
6537 Start: |1 Duration: |2:|3
6538 Move to: |1
6539 Drag an appointment to move it. Hold CTRL to duplicate it.
6540 Duplicate on: |1
6541 Six-month layout01
6542 Two-month layout02
6543 Three-month layout03
6544 Four-month layout04
6545 One-month layout05
6546 Time-line intervals06
6547 One third-height diary07
6548 Two thirds-height diary08
6549 Full-height diary09
6550 Users layout10
6551 Year planner11
6552 Look into the future12
6553 View as a table13
6560 The contact or company which you are trying to reference cannot be found.\n\nPossible causes are that it has been relocated to another part of the database, or has been deleted.
6561 |1in |2 daysB|2 day(s) agob
6562 TodayTomorrow
6563 \fs24 Summary of \b |1\b0\par\pard\li284\fs20\b |2 item(s):\b0\par\pard\fs16
6564 Phonecalls in|Phonecalls out|Meetings|Meetings|E-Mails in|E-Mails out|Faxes in|Faxes out|Letters in|Letters out|Money in|Money out|Attachments in|Attachments out|Smiley|Smiley|Forecasts|Forecasts|Reminders|Reminders|Anniversaries|Anniversaries|Birthdays|Birthdays|Write a letter/E-Mail|Write a letter/E-Mail|Trips|Trips|Presentations|Presentations|Medicals|Medicals|x|x|x|x|x|x|x|x|Holidays|Holidays
6565 Future appointments from |1
6566 Details
6567 Your schedule is free from |1 onwards.
6568 List from |1 onwards
6569 Statistical summary from |1 to |2
6570 Building a diary, |1% complete. Press Escape to cancel.
6571 still to do
6572 View on-screen-Send 1 month to clipboardSend 2 months to clipboardSend 3 months to clipboardSend 6 months to clipboardSend 12 months to clipboard
6573 Searching for future events in |1 (pass |2 of 2)... Press Escape to cancel
6574 |!50 found |1 future events and they have been copied to the Clipboard.
6707 First document|Back one|Next one|Last document|Schedule a call-back|Templates|Launch viewer|Restore the previous contents|Delete this file
6708 Linking...
6709 Extract from the file:
6710 Notify:
6711 PAGE
6712 Document |1 created by |1
6713 The Folder, Company or Contact which you selected could not be found.\n\nThis may be an error in the |!50 index, which could be resolved by rebuilding the index file. Select '|í2202' from the '|í5200' menu to rebuild the index file.
6714 (internal)
6715 Add another
6716 Remove link
6720 File |1 linked to |2
6721 File |1 linked to |2 at |3
6722 |4 linked to |2
6723 |4 linked to |2 at |3
6724 File |1 sent to |2
6725 File |1 sent to |2 at |3
6726 |4 sent to |2
6727 |4 sent to |2 at |3
6728 File |1 received from |2
6729 File |1 received from |2 at |3
6730 |4 received from |2
6731 |4 received from |2 at |3
6732 |2 sent us the file |1
6733 |2 at |3 sent us the file |1
6734 |2 sent us a |4
6735 |2 at |3 sent us a |4
6736 |5 created the file |1 for |2
6737 |5 created the file |1 for |2 at |3
6738 |5 created a |4 for |2
6739 |5 created a |4 for |2 at |3
6740 Archive
6741 Started a contract with |2
6742 Started a contract with |2 at |3
6743 Started a |4 with |2
6744 Started a |4 with |2 at |3
6745 End of contract with |2
6746 End of contract with |2 at |3
6747 End of |4 with |2
6748 End of |4 with |2 at |3
6749 (nobody)
6750 Contract with |1:\nStarted: |2\nExpires: |3
6800 |!50 Log On
6801 Log on as:
6802 Password:
6803 (no password required)
6804 You have not entered the correct password for '|1'.
6805 Incorrect password!
6806 Identity|Create New User|Special|Password|Register
6807 Create
6808 Setting:
6809 Name:
6810 You need to use Setup > User to specify your initials.
6811 Reset password
6812 Are you sure that you want to clear the password for user '|1' ?
6813 No users were found in the Shared file ("|1") and so you are unable to log on to |!50 at this time.\n\nCheck that this path is valid, and that you have access to the relevant drive.
6814 Are you sure that you want to create a new user called '|1' ?
6816 Are you sure that you want to permanently delete the user called '|1' (personal folder is '|2') ?
6818 You cannot merge Diary data into the Diary for the user who you are about to delete.\n\nDo you want to continue without merging the Diary data?
6819 All the Diary entries for the deleted used will be merged into the Diary for '|1'.
6820 The merging of the two Diaries could not be done because the Diary for '|1' could not be opened.\n\nDo you still want to delete '|1' from the user list? (You will NOT be able to merge data from this Diary at a later date).
6821 Note: In this version of |!50 you are limited to a maximum of |1 user(s). You currently have |2.
6822 This version of |!50 is limited to |1 user(s), and the Shared file associated with '|2' contains |3 users.\n\n|!50 will continue to load, but only the first |1 user(s) will be listed.
6823 This version of |!50 is limited to |1 folders, and the Index file contains references to |2 folders.\n\nYou can continue to use |!50, but you will not be able to add new folders.\n\n(If you believe that you have less than |2 folders, you should log on as the Administrator and rebuild the Index file by choosing '|í2202' from the '|í5200' menu.)
6824 You password has expired. Choose one of the following options:
6825 Keep using the same password
6826 Set this as my new password:
6827 This product must be registered before you can use it. Click 'On-line' below to register via the internet, or visit www.aptprojects.com. After registering, enter the 10-digit code into the box and click 'OK'. You only have to do this once.
6828 On-line
6900 Web Browser
7000 Re: B|1b
7001 Company details for |1
7002 Contact details for |1
7003 (This folder)
7004 Press Escape to abort. Reading "|1"
7005 Created by \b |1 \b0
7006 Duration \b |1 \b0
7007 Cost: \b |1 \b0
7008 Date: B3|1b0t Logged by: B3|2b0
7009 Attachments: B3|1 (|2)b0
7010 No attachments
7011 (Source: |1)
7012 Populating events list...
7013 Dated \b |1 \b0
7014 (missing)
7015 This folder contains data, but nothing passed through the filter.
7016 bE-Mail to: B|1b Re: B|2b
7017 Private|Business
7018 No addresses were found for this contact.\n\nDo you want to continue anyway?
7048 Click here to display another |1 items (if available)
7049 \b A problem occured while trying to display this event.\b0\par\par Possible causes are:\par - The folder containing this event has moved or has been deleted\par - The folder is part of an alternate log-on path profile and is not part of your filing system\par - The event file could not be opened or is corrupted\par\par\b Extended information:\b0\par |1
7050 (multiple attachments)
7051 |1 has forecast a |2 with |3 on |4 for |5 (|6)expected by |7probability of |8%
7533 Large thumbnails,Medium thumbnails,Small thumbnails
7534 Fit to Width,Fit to Screen,Original size (100%)
7535 Sort by Name,Sort by Type,Sort by Date
7536 File name|File date|Size on disc|Size in memory|Width|Height|Colour depth|Pages
7537 There are no images in this folder.
7538 This image is colour, and may not transmit very well as a black and white fax. Do you want to view it as it will appear to the recipient, before going ahead with the transmittal?
7706 This value must be between |1 and |2 characters in length. The current value is |3 characters long.
7707 This value cannot contain spaces.
7708 This value must be numeric.
7720 Yes,-1No,0
7721 Click the property that you wish to edit.
7722 Movement of controls on the form will be dictated by the grid.
7723 Sets the spacing between grid locations (in pixels). Values must be between \cf1 |1\cf0 and \cf1 |2\cf0 .
7724 Sets the height of a control (in pixels). Values must be between \cf1 |1\cf0 and \cf1 |2\cf0 .
7725 Sets the width of a control (in pixels). Values must be between \cf1 |1\cf0 and \cf1 |2\cf0 .
7726 Sets the top (Y) position of a control, relative to the top edge of the form (in pixels).
7727 Sets the left (X) position of a control, relative to the left edge of the form (in pixels).
7728 Sets the colour used for the background of the control. Double-click to open the colour-picker.
7729 Show/hide a grid of dots at design time. The grid is a visual aid to help with the lining-up of controls. Use \cf1 SnapToGrid\cf0 to make lining-up easier.
7730 Sets the appearance of the border around the control.
7731 Sets the name of the field in your database. You cannot have two fields (controls) with the same name.
7732 Sets an image for use as the background to the form. The appearance of the image is controlled by the \cf1 BackStyle\cf0 property.
7733 Sets how the \cf1 BackImage\cf0 picture will appear. Using the \b Tiled\b0 option with a small image will slow down the load time of the form.
7800 Right-click for properties
7801 Drag the mouse
7802 None,1Single 2D,2Light 3D,3Heavy 3D,4
7803 Tiled,1Centred,2Top left corner,3Top right corner,4Bottom left corner,5Bottom right corner,6Stretch to fit,7
8031 This '|1' form submission cannot be processed because there are no fields defined for this type of form in the |!50 setup. You must use Setup to define which fields on your form match with the fields in |!50.\n\nTo access Setup, click the '|!5100' menu and choose '|í8200'.
8032 To process form submissions, you must use the Setup window to define the forms and the fields which they contain, and how those fields match up to the |!50 database.\n\nTo access Setup, click the '|!5100' menu and choose '|í8200'.
8033 You cannot process form submissions because you do not have a path set for new callers, which is where your form submissions will be created.\n\nTo set a path for new callers, use the Setup window.\n\nTo access Setup, click the '|!5100' menu and choose '|í8200'.
8034 Processing...
8035 The form submission you are trying to process is called '|1', which has not been defined in Setup.\n\nTo access Setup, click the '|!5100' menu and choose '|í8200'.
8036 None of the fields in the form submission matched the fields which you have defined for '|1' in Setup, and so no new record will be created. Check the field names for '|1' and try again.
8037 Processed form submission for B|1b
8038 |1 (default)
8039 1New messagesNEW|1Mail archiveSENT
8040 Connect via '|1'
8041 You are part-way through composing or editing an email. Do you want to continue with that task?
8042 There is nothing to do!
8043 X-Mailer: |!50 v|1
8044 |1 out of |2 transferred\nTime to go: |3m |4s
8045 Filing a copy to:\n|1
8046 Sent an e-mail to |1 re: |3
8047 Sent an e-mail to |1 at |2 re: |3
8048 You have selected |1 e-mail(s) in the out basket. Do you want to send only the selected e-mails?\n\n(If you choose 'no', all e-mails will be sent.)Send only the selected e-mails?
8049 BEstablish a connectionb via '|1'
8050 BDisconnectb from '|1'
8051 BSend mailb to B|1b re: B|6bnat '|2' (+|5 additional recipient(s) (|3 file(s) attached) To send: |4
8052 BCheck for new mailb for B|1b (|2) via '|3'
8053 2BNew mail!0b from B|1b to B|5b re: B|2bn|3 To receive: |4
8054 BNo mailb waiting for you on '|1' (|2)
8055 B|1 new message(s)b found in the 'B|2b' (|3) postbox...
8056 BWaiting...bnUse the toolbar buttons to get your mail, then click the 'Continue' button...
8057 BStoredb the mail from B|1b re: B|2b
8058 BReadingb the message from B|1b re: B|2b
8059 BDeletedb the mail from B|1b re: B|2b
8060 BStay connectedb to '|1'
8061 Connecting...
8062 Disconnecting...
8063 Connecting to the mail server...\nPlease wait...
8064 You've got |1 new item(s) of mail!\nGetting information...
8065 Make a selection of mail items, then click the 'Get' or 'Delete' buttons on the toolbar.
8066 Getting message |1 out of |2 messages...\nPlease wait...
8067 Sending message to |1...\nPlease wait...
8068 Decoding message...\nPlease wait...
8070 Save attached file as...
8071 You have not specified a filename for the attachment. If you continue, the attachment will not be saved.\n\nAre you sure that you want to continue?
8072 Remote host could not be found.Unexpected server response.Invalid user name or password.No response from the server - timeout.The connection to the server has been reset.An unusual error occured while e-mailing:\n\n|1
8073 This message no longer exists on the mail server.
8074 |!50 failed to connect. Possible causes are:\n\n- The modem is not switched on\n- The line was busy, or the server did not respond\n- There was interference on the line\n- Your user name or password was incorrect\n- You already have an active dial-up connection for another account
8075 Untitled attachment.txt
8076 Are you sure that you want to delete the |1 selected file(s) and any attachments associated with them?
8077 Internal e-mail
8078 You cannot send an e-mail to this person until you set up an external e-mail account in Setup.
8079 Looking for mail to be sent...
8080 |1 messages were sent, and\n|2 new messages were received.|3
8081 There is a message from |1 regarding '|2' which is |3 in size - do you want to get it?
8082 Interrupting the current operation...\nPlease wait...
8083 You must file this message in |!50 before you can reply to it.\n\nDo you want to file it now?
8084 The message from '|1' matches your criteria for being automatically deleted.\n\nDo you want to delete it?
8085 \n\nThe fields in the form submission were: |1
8086 \n\nAlso check that you have specified the correct field delimiter. The field delimiter is whatever separates the field names from the data (Eg. 'FieldName=Data' has '=' as the delimiter).
8087 You can only re-send e-mails which you wrote.\n\nDo you want to forward it to someone else instead?
8088 \n\n(|1 item(s) of mail were not retrieved because they were not addressed to you).
8089 B|1 new message(s)b are for you, B|2b are for other people
8090 BMessage sentb to B|1b re: B|2b
8091 \fs20\b '|1' \b0 is a grouping of these form submissions...\pard\par\fs16
8092 The form submission was supposed to be added to '|1', but that folder does not exist.
8180 Dial-Up Networking
8181 User name:Password:Status:Save passwordConnection:Connections in |1
8203 Account names:New value:Connect via:Ask before automatically deleting this itemFolders which can be published to:Add folder:
8204 Settings for '|1'
8205 Enter the subject name from your form submission.\n\n(This is the text which appears as the Subject when you receive a form submission).|Create new identifier|Change identifier
8206 Are you sure that you want to delete '|1' and all the settings associated with it?
8207 Select a field...
8208 BNew form fieldbt|!8207
8209 Are you sure that you want to delete '|1'?
8210 Do you want to save the changes which you made to "|1" ?
8211 (Nobody)
8212 You must either save or discard the changes you have made to '|1' before you can edit another section.\n\nDo you want to save the changes which you made?
8213 User name:Password:Password expires after |1 daysFiling folder:Job title:Phone extensions:Access rights:Initials: I oversee:Home postcode:Implement password expiryI can have jobs allocated to meI can allocate jobs to other users
8214 (No path defined)
8215 Replace this:With this:Formats:Create pages based on the standard |!50 mark-up layoutCreate pages based on a specific mark-up file:
8216 Replace text as you type:Format large numbers (Eg. ú1234567 becomes ú1,234,567)COrrect TWo CApital LEtters
8217 Replace this:With this:
8218 Real name or Alias|This is your name, which will appear in the "Sender" field of outgoing mail. You can use an alias or nickname if you wish.\n\nExample entry: "Jennifer Cox"|E-Mail address|(Optional)\nThis is your E-Mail address, used as the return address for replies to your E-Mails. |!8219\n\nExample entry: "jennycox@myhost.com"|POP Host|(Optional)\nThis is the address of your service provider's Post Office. |!8219\n\nExample entry: "pop.myhost.com"|POP Account name|(Optional)\nThis is the mailbox name in the Post Office which will be checked for mail. With some accounts, it's the text which appears before the @ in your E-Mail address. |!8219\n\nExample entry: "jcox987"|POP Password|This is the password for your account, which will allow you access to your mail. |!8219\n\nExample entry: "mypassword"|SMTP Host|This is the address of your Service Provider's mail distribution host. |!8219\n\nExample entries: "smtp.myhost.com"
8219 If you leave this entry blank, you will not be able to receive or send E-Mails via the internet. This setting is not required for internal E-Mail.
8221 Specify the tag within your hypertext file which will be replaced by the data from |!50.\n\nFor example, use a comment tag (<!-- -->) at the point in your page where you want the data to be inserted.
8222 Select hypertext template file*.htmHTML files|*.htm;*.html;*.shtml|WAP files|*.wml|All files (*.*)|*.*Select the font to be usedSelect a colour
8223 When linking to a contact, add a link to the company (if applicable)Write a diary entry at the time of linkingWrite a diary entry on the 'Date Sent' (if applicable)Write a diary entry on the 'Date Received' (if applicable)Write a diary entry on the 'Date Created' (if applicable)Diary entries:
8225 Name only|A|Reference only|R|Full reference only|P|Name, then reference|A (R)|Reference, then name|R (A)|Name, then full reference|A (P)|Full reference, then name|P (A)|(Tweaked)
8229 Show Explorer icons for events which have attachmentsShow ToolTipsShow large toolbar buttons (where possible)Company / Contact SummaryDisplay the summary using Arial |1 pointShow the |2 most recent active forecastsShow |3 options when this Setup window opensShow distance and driving time from |4(all)(none)
8230 Show the taskbarShow Wizards on the taskbarShow Modules on the taskbarShow these shortcuts on the taskbar:Use full-colour icons if possibleAlways use full-colour iconsAlways use standard-colour icons
8231 Pop-up identifiers:
8232 (None)
8233 Enter the name which will pop-up when a DDI signal is detected. You can then specify the numbers which will activate this name.|Create new DDI pop-up name|Change DDI pop-up name|Enter a phone number which will pop-up the '|1' name. Spaces and other formatting characters will be ignored, but can be included.|Add a new number
8234 Default entries:\n(Every |1 minutes)
8235 Numbers which will activate '|1'
8236 Enter a name which will identify the new e-mail account.\n\nEg. 'My office e-mail account'|Create new e-mail account|Change e-mail account name
8237 \n\n(Deleting the account will NOT erase any e-mails which were sent or received through this account).
8239 General|Show website addresses in messages as hypertext|MakeLinks|CHK|-1|-1|Leave mail on the host|LeaveMail|CHK|-1|0|Ignore mail which is not addressed to me|CheckAddress|CHK|-1|0
8240 Attachments|Encode as Base 64|Encoder|RAD|base64|base64|Encode as Quoted Printable|Encoder|RAD|quoted-printable|base64
8241 Replying|Always include the original message|Include|RAD|Always|Always|Prompt user whether to include the original message|Include|RAD|Ask|Always|Display the original message in italics|Italicise|CHK|-1|-1
8242 Priorities|Default is High priority|Priority|RAD|HIGH|MED|Default is Normal priority|Priority|RAD|MED|MED|Default is Low priority|Priority|RAD|LOW|MED
8243 I grant access to my diary
8244 Enter a descriptive name for the new set of paths.\n\nEg. "|!500"|Create new path profile|Change path profile name
8245 Do you want |!50 to automatically allocate as many of the paths as possible, based on the folders which it finds on your system (recommended)?
8246 Day starts at:Day ends at:Embolden the hours
8247 Show the statusbarShow clocks on the statusbar (Max. 5)Show logged-on user nameShow background processing stateClock format:
8248 World Trade Centre timesLocal time,99Beijing,8London,0Los Angeles,-8Moscow,3New York,-5Paris,1
8249 Standard Notation timesGMT,0UTC,0EST,-5EDT,-4CST,-6CDT,-5MST,-7MDT,-6PST,-8PDT,-7
8250 Australia & New ZealandAustralia Central,9.3Australia East Coast,10Australia West Coast,8New Zealand,12
8268 Show all eventsShow the |1 most recent eventsShow events over the last |2Show all files (most recent first)Show in blocks of |3 files (alphabetically)(or the |4 most recent events, whichever is more)(Excludes New E-Mails pending tray)
8269 twenty-five|25fifty|50seventy-five|75one hundred|100one hundred and fifty|150two hundred|200three hundred|300four hundred|400five hundred|500
8270 two weeks|14four weeks|28six weeks|42two months|62six months|186year|365two years|730
8271 Sending|Add quote-marks ("...") to names on out-going E-Mails|AddQuotes|CHK|-1|-1|Send plain text followed by mark-up text|Format|RAD|Both|Both|Send plain text only|Format|RAD|Plain|Both|Send carbon copies (CCs) as blind carbon copies (BCCs)|SendCCsAsBCCs|CHK|-1|0|Use the first line of the message if the Subject is empty|AutoSubject|CHK|-1|-1|Word-wrap text to 76 characters per line|SplitText|CHK|-1|-1
8272 Contact history|Always show the history of the person you're e-mailing|ShowHistory|RAD|Always|Ask|Ask whether to show the contact history|ShowHistory|RAD|Ask|Ask|Never automatically show the contact history|ShowHistory|RAD|Never|Ask
8273 General|Disconnect after sending or receiving e-mail|Disconnect|CHK|-1|-1
8274 Interface|Standard- Send and receive e-mails autonomously|Interface|RAD|Standard|Standard|Advanced- Requires user interaction|Interface|RAD|Advanced|Standard
8275 Timeout|Short- Timeout after 15 seconds|Timeout|RAD|15|15|Medium- Timeout after 30 seconds|Timeout|RAD|30|15|Long- Timeout after 1 minute|Timeout|RAD|60|15|Never- Wait indefinitely|Timeout|RAD|0|15|Try to connect upto 3 times before reporting failure|TimeoutRetries|CHK|-1|-1
8276 Attachments|Download attachments without asking|Attachments|RAD|-1|128|Ask before auto-downloading attachments over 128k|Attachments|RAD|128|128|Ask before auto-downloading attachments over 512k|Attachments|RAD|512|128|Ask before auto-downloading attachments over 1Mb|Attachments|RAD|1024|128
8278 Cells|Word-wrap text if a cell is not wide enough|WordWrap|CHK|-1|-1
8279 Sender is: |1Subject is: |1Subject contains: |1Subject begins: |1
8280 New tables have |1 rows and |2 columns
8281 Copying to the Clipboard|Replace toggles with 'X' if set, nothing if not set|ToggleChars|RAD|X|X|Replace toggles with 'Y' if set, 'N' if not set|ToggleChars|RAD|YN|X|Replace toggles with '1' if set, '0' if not set|ToggleChars|RAD|10|X|Always include the header row when copying|CopyHeaderRow|CHK|-1|-1|Always include the header column when copying|CopyHeaderColumn|CHK|-1|-1
8282 Filing|File attachments along with outgoing e-mails|FileAttachments|CHK|-1|-1|File the message to the company as well as the contact|FileToCompany|CHK|-1|-1
8283 Setting:All paths are either local or peer-to-peer
8286 Note,A peer-to-peer network means that your computers are networked together, but there is no central server (such as a Windows NT or Novell NetWare Server).
8287 Note,Your form submission should contain lines like:\nFieldName=Data\n\nEnter the FieldName part in the box marked Form Field, and match it up to a |!50 field.\n\nThe delimiter is whatever separates the field from the data (usually an equals sign).
8288 Settings for normal folders (in the Filing tree, Archive etc.)Settings for pending trays (Scanned images, faxes etc.)
8290 PreviewFont / Size:Background:Today:Non-working days:Busy days:First day of the week:Non-working hours:Total working week:Appointment colours:Default appointment type:Working hours:Embolden busy daysLunch
8291 |1 hours, |2 minutes
8292 Every minuteEvery |1 minutes
8293 Appointment frequency|Every minute|EventFrequency|RAD|1|30|Every two minutes|EventFrequency|RAD|2|30|Every five minutes|EventFrequency|RAD|5|30|Every six minutes|EventFrequency|RAD|6|30|Every ten minutes|EventFrequency|RAD|10|30|Every quarter of an hour|EventFrequency|RAD|15|30|Every twenty minutes|EventFrequency|RAD|20|30|Every half an hour|EventFrequency|RAD|30|30|Every hour|EventFrequency|RAD|60|30
8294 Time format|12 hour clock (am/pm)|TimeFormat|RAD|12|12|24 hour clock|TimeFormat|RAD|24|12
8295 Header|Hide the e-mail header|ShowHeader|RAD|0|0|Show the e-mail header at the end of the message|ShowHeader|RAD|-1|0
8296 Quick navigation bar|Show the quick navigation bar|NavBar|CHK|-1|-1|Show appointments (hour view only)|NavBarOverview|CHK|-1|-1|Snap to the closest hour / day|SnapToNav|CHK|-1|0
8297 Connection|Folders|Advanced
8298 Host name|This is the name of the server or an IP address.\n\nExample entries:\n"ftp.myserver.com"\n"192.205.88.100"|User ID/name|This is your user name which identifies you to the server. It is usually either "anonymous", part or all of your e-mail address, or a user ID supplied by your service provider.\n\nExample entries:\n"anonymous"\n"jcox987"\n"jennycox@myhost.com"|Password|This is the password which matches your user ID. It is usually the same as the password for your e-mail account. If you are using "anonymous" as your user ID, most servers expect your e-mail address as the password.\n\nExample entries:\n"mypassword"\n"jennycox@myhost.com"|Remote folder|(Optional)\nThis is the root folder on the remote server which your service provider has allocated to you. Your files and folders branch from this point.\n\nExample entry: "sersublic"|Account|(Optional)\nSome servers require an account name as well as a user ID.\n\nExample entry: "jennycox"|Port|(Optional)\nSets the port number to use when connecting to the host, usually 21.|Firewall Host|If you are connecting to a host via a firewall, enter the firewall host name here.|!8300|Firewall User ID|For connecting via a firewall, enter your firewall user ID here.|!8300|Firewall Password|For connecting via a firewall, enter your firewall password here.|!8300|Firewall port|For connecting via a firewall, enter a port number here.|!8300|Socket library|This is the library file which is used to communicate with the server. It cannot be edited directly.|Website (URL)|(Optional)\nThis is the address of your website.\n\nExample entry: "http://www.mysite.com"
8299 Enter a name which will identify the new FTP account.\n\nEg. 'Office server'|Create new FTP account|Change FTP account name
8300 \n\nNote: This setting is used only when the 'Use Firewall' setting is selected in 'Advanced'.
8301 Firewall settings|Connect through a firewall|UseFirewall|CHK|-1|0|Use "Socks4" firewall|FirewallType|RAD|1|2|Use "Socks5" firewall|FirewallType|RAD|2|2|Use proxy USER command|FirewallType|RAD|3|2|Use proxy SITE command|FirewallType|RAD|4|2|Use proxy PROXY command|FirewallType|RAD|5|2|Use proxy OPEN command|FirewallType|RAD|6|2|Use simple Pipe|FirewallType|RAD|7|2
8302 General|Disconnect after uploading files|Disconnect|CHK|-1|-1|Passive transfers (PASV)|Passive|CHK|-1|0|Only display known FTP server responses|ShowDialogue|CHK|-1|-1
8303 Filename adjustments|Leave filenames as they are|ChangeCase|RAD|0|0|Convert filenames to lower-case|ChangeCase|RAD|1|0|Convert filenames to upper-case|ChangeCase|RAD|2|0
8304 Data transfer|Send files as Binary files|TransferMode|RAD|1|1|Send files as ASCII files|TransferMode|RAD|0|1
8307 Output file|Unlimited size|SizeLimit|RAD|-1|-1|Limit to 1k|SizeLimit|RAD|1024|-1|Limit to 2k|SizeLimit|RAD|2048|-1|Limit to 4k|SizeLimit|RAD|4096|-1|Limit to 8k|SizeLimit|RAD|8192|-1|Limit to 16k|SizeLimit|RAD|16384|-1|Limit to 32k|SizeLimit|RAD|32768|-1
8308 Formatting|Keep font face changes|KeepFontFace|CHK|-1|-1|Keep font size changes|KeepFontSize|CHK|-1|-1|Keep font style changes (bold, underline etc.)|KeepFontStyle|CHK|-1|-1|Keep font colour changes|KeepFontColour|CHK|-1|-1|Format text to reduce blank lines|LoseBlanks|CHK|-1|0
8314 Enter the text which will prefix the files containing both event histories and folder navigation links.Tree file prefix
8315 Enter the text which will prefix the files containing event histories.Event file prefix
8316 Connection|Use specified connection for both sending and receiving|ConnectContext|RAD|BOTH|BOTH|Use specified connection when sending, use any when receiving|ConnectContext|RAD|SEND|BOTH|Use specified connection when receiving, use any when sending|ConnectContext|RAD|RECV|BOTH
8317 Next job #:Uploadable forms:Replace this:With this:HTML print command:Warranty typeResponse timeWorking days:Start time:Finish time:Warn if no asset is selected
8319 Job numberDescription of the jobCompany nameContact nameAlternate contact nameClient addressAlternate addressDate of the service callTime of the service callUser who took the service call|!50 user list (combo box format)User allocated to the job|!50 filing referencePurchase order (optional)Job status
8327 Your registration code only allows you to select a maximum of |1 user(s). Untick a user before selecting another, or call your dealer for a new registration code which will allow more users to be selected.
8328 The |1 file could not be updated.\n\nCheck that it is not stored on a read-only drive.
8329 Properties|Users|Test area
8330 Residences onlyResidences and companies
8333 Details|Sharing|Service Management / Skills
8334 Someone is using |1. How about |2?Suggestions: |3
8339 Database folder:User name:Password:Note: Linking to a Sage« accounts database requires a valid installation of the Sage« software on your computer. Enter a Sage« account reference in the 'User defined 1' field for either a contact, company or family, and |!50 will display the current balance, credit limit and account status. The link to Sage« is READ-ONLY: your Sage« data will not be altered in any way.Version 5 or 6Version 7Link to Financials
8400 Compose a new message
8401 Re: |1
8402 Font colour,COLOUR
8403 Bold,BOLD
8404 Italic,ITAL
8405 Underline,UNDER
8406 Show/Hide header,HEADER
8407 Low priority,LOW
8408 Medium priority (normal),MED
8409 High priority,HIGH
8410 Send to out-basket,OUTBOX
8411 Send to draft,DRAFT
8412 Schedule a call-back,CALLBACK
8413 Grab notes from above,GRAB
8414 Templates,TEMPLATES
8430 To|From|Subject|CC|Attachment
8431 y< click here to enter a subject >
8432 Do you want to delete the message you've written and replace it with the default message for the '|1' account?
8433 y< click here to add an attachment > (|1 file(s) attached, total |2)
8434 You are sending this e-mail in your capacity as an internal |!50 user, so you cannot send it to external e-mail accounts.\n\nTo send this e-mail you must choose a different account by clicking 'From' in the message header.
8435 y< click here to add another recipient > (|1 other recipient(s) specified)
8438 Are you sure that you want to remove the attachment "|1"?
8439 Select the files to attach to your E-Mail...All files (*.*)|*.*
8440 Send:
8442 This event has files associated with it. Do you want to attach these files to your e-mail message?
8443 y< click here to specify the recipient >
8444 Add a new e-mail address:There are no e-mail addresses for |1. You can enter one below, or choose '|í401'.There are multiple e-mail addresses for |1. Choose one from the list below.
8445 Adding recipients... (|1% done)
8446 (internal)
8447 You can only address this e-mail to internal |!50 users because you are sending it in your capacity as an internal |!50 user.\n\nTo send this e-mail to non-|!50 users, you must choose a different account by clicking 'From' in the message header.
8448 I am forwarding this message which I received from \b |1 \b0 (|2):\par\par
8449 On \b |1 \b0 you wrote:\par\par
8450 Do you want to include the original message in your new composition?
8451 Do you want to see the event history for |1?
8500 E-Mail Auto-Linking
8501 LinkView
8502 Searching for |1\n(|2)
8503 No matches were found for\n|1 using <|2>
8504 Found |1\n(in |2)
8505 There was a problem with |1. Check that this user has set a folder for filing e-mails into, and that the user hasn't been removed from |!50.
8510 Link to:E-Mail address:
8511 B|1b (in |2)
8512 BArchiveb into B|1b
8513 New...
8514 Accept
8515 Search for the target folder manuallyCreate a new folder for this sender:
8516 E-Mail re: |1 linked to |2
8517 E-Mail received from |2 re: |1
8518 E-Mail sent by |2 re: |1
8519 Do you want to add '|1' as an e-mail address for |2?
8520 Create in the folder for New ContactsCreate in:
8600 Data Table
8601 Back,BACK
8602 Next,NEXT
8603 New table,NEW
8604 Open a table,OPEN
8605 Save changes,SAVE
8606 Fill table from folder,FROMFDR
8607 Create virtual folder,TOVIRT
8608 Auto-Fill using filters,FILTER
8620 Standard table
8621 Campaign plannerSent letter #1ªTOGGLE:TICK2ª1500Follow-up callªTOGGLE:TICK2ª1500ªSPACEª45Sent letter #2ªTOGGLE:TICK2ª1500Follow-up callªTOGGLE:TICK2ª1500ªSPACEª45Notesªª4000
8622 Exhibition plannerStand no.ªª1000Size (Sq. M.)ªª1200ConfirmedªTOGGLE:REDFLAGª1000Cost to clientªª2000Cost to usªª2000Liasonªª3000Notesªª4000
8632 Save table as...tbl|!8637.tbl|!50 Table (*.tbl)|*.tbl|Comma Separated Values file (*.csv)|*.csv
8633 Open a tabletbl|!50 Table (*.tbl)|*.tbl|All files (*.*)|*.*
8634 Templates,TEMPLATE
8635 Enter a new name for this column.\n\nIf you leave the name blank, it will be set the to default name of '|1'Rename column
8636 Filling table...
8637 Untitled
8638 You can only sort columns if the data in the column refers to a contact or company in the left-hand header column.\n\nIn this case, as there are no contacts or companies defined, no sorting will take place.
8639 Refreshing table... Press Escape to cancel... (|1% complete)
8640 Are you sure that you want to clear all the data from the selected cells?
8641 Are you sure that you want to delete the selected row(s) or column(s)?
8671 Forecast field groups|All sales forecast fields|FORECAST:1:20|FORECAST:1:21|FORECAST:1:1|FORECAST:1:2|FORECAST:1:3|FORECAST:1:4|FORECAST:1:5|FORECAST:1:6|FORECAST:1:7
8672 All sales forecast fields / Company name|4:1:COM|FORECAST:1:20|FORECAST:1:21|FORECAST:1:1|FORECAST:1:2|FORECAST:1:3|FORECAST:1:4|FORECAST:1:5|FORECAST:1:6|FORECAST:1:7
8673 NY
8674 Important! You should set the columns in your table BEFORE filling the table using this Auto-Fill filter option.\n\nDo you want to continue?
8675 Note: If you refresh any rows or columns in this table, or add new columns, the filters which you used to fill the table will NOT be applied to the refreshed/added data.\n\nFor accurate results, set the columns in your table before using the Auto-Fill feature.
8676 All purchase forecast fields|FORECAST:2:20|FORECAST:2:21|FORECAST:2:1|FORECAST:2:2|FORECAST:2:3|FORECAST:2:4|FORECAST:2:5|FORECAST:2:6|FORECAST:2:7
8677 All purchase forecast fields / Company name|4:1:COM|FORECAST:2:20|FORECAST:2:21|FORECAST:2:1|FORECAST:2:2|FORECAST:2:3|FORECAST:2:4|FORECAST:2:5|FORECAST:2:6|FORECAST:2:7
8805 Awaiting better discount/priceAwaiting confirmationAwaiting decision of third partyAwaiting details of final specificationAwaiting evaluation of quotationAwaiting final decisionAwaiting issue of POAwaiting move to new premisesAwaiting new modelAwaiting outcome of testsAwaiting presentationAwaiting quotationAwaiting restructuringAwaiting return of key personnelAwaiting revised quotationAwaiting year endSee notesWaiting due to change of personnelWaiting for a decision on...
8811 Straight-line distance from |1 to |2: |3 miles Estimated driving time averaging 20mph: |4
8813 Do you want to save changes in the 'Active' column?
8814 Do you want to add the new forecast?
8815 Copying from the table will overwrite the information which you have entered in the forecast boxes.\n\nDo you want to copy?
8816 Forecasts:
8900 Add entries to the table based on:
8901 Type of forecast:from:...to:...where the date is:from:...to:Show the most recent...Between these dates:Made by these users:Ignore inactive forecastsWith statuses of:Between these dates:Most recent
8902 Forecasts|Service calls
8903 Beginning of timeEnd of time
8904 Date expected byDate of forecast
8905 Nothing passed through the filters.\n\nDo you want to check your choices and try again?
8906 The date range which you have chosen is invalid, because the end date is before the start date.\n\nDo you want to swap them around?
9000 Customer Service Management
9001 Job
9002 Service call #|1 re: |2 logged by |3:
9003 Job category:Status:Allocate to:Contact point:Address:Purchase order:Estimated duration:Priority:Print these formsCreate a new service callAdd to an existing service call:Search for:
9004 Description / New notesForms to sendAssetsJob historyUsers
9005 You are about to create a new service call.You are adding additional information to an existing service call.Do you want to continue?
9006 (Additional notes added by |1 on |2):\n|3
9007 Additional notes added to service call #|1 re: |2 logged by |3:
9008 (No status)01Not assigned02Allocated to Engineer03Deferred to Outstanding04Brought to workshop05Re-assigned to Engineer06Workshop complete07On site complete08Signed off complete09
9014 You have not selected an asset. Do you want to continue?
9015 PreviewReprintDetails
9016 You cannot enter job details because you don't have a path set for storing job information.\n\nGo to Setup > Paths and set a path for 'Service Calls'.
9017 (No category)HardwareSoftwareSalesAdministration
9018 UserQualificationDistanceTravel timeETADue by
9019 (Unknown)01Half an hour02One hour03One and a half hours04Two hours05Two and a half hours06Three hours07Three and a half hours08Four hours09Five hours10Six hours11Seven hours12Eight hours13All day14Two days15Three days16Four days17
9020 Estimated duration changed to |1.
9021 Contact point changed to '|1'.
9022 Address changed to '|1'.
9023 (No priority)01Critical02Urgent03High04Normal05Low06
9024 Priority changed to |1.
9025 Category changed to '|1'.
9100 To-Do list
9101 DetailsDue dateStatus% doneTime spent
9102 |1 hrs|2 mins
9103 My to-do list|My CSM to-do list|My CSM Big Board|Entire CSM Big Board|Form Submission notifications
9104 Job no.DateDetailsStatus
9105 DateForm submission
9106 Job no.DateDetailsStatusAllocated toCategory
9107 The list is empty because you have not specified those categories of jobs which you oversee.\n\nGo to File > Setup > User > Skills and tick the categories which you oversee.
9404 Insert beforeInsert afterDelete-Move leftMove rightMove...-Make this the TopMake this the BottomMake this the LeftMake this the Right-Renumber...
9405 Are you sure that you want to change the button captions to '|1' etc.?
9406 TBLR|NSWE|ABCD
9407 Gender: He / SheGender: he / sheGender: His / HerGender: his / herGender: him / her-Company / family nameTitleFirst nameSurname-Drop-list choice
9408 Insert a field...,INS
9409 Fields:
9410 This button cannot be moved onto this template side because it already contains the maximum number of buttons.
9411 The button that you moved still exists on the side that you moved it from because each side must have at least one button. To hide a template side, un-tick the box adjacent to it.
32000 AlphaNumeric,If the number you are entering contains letters, |!50 will automatically convert them into digits.\n\nEg.\n 1 800 COMPUTE becomes\n 1 800 2667883
32001 Telephone,Give each telephone a name, for example:\n\n - "Sales phone"\n - "Main desk phone"\n - "Blue phone with tea stain!"
32002 ,A telephone with 6 lines can handle 6 simultaneous calls. A single phone may be able to handle more than one call at a time if you have a caller interrupt feature.
32003 Wizard,Click the Next and Back buttons to step through a Wizard.\n\nIf they're greyed-out, then you need to supply some information to the Wizard before you can proceed.
32004 MoveRecursiveNode,Click the items in this preview area, and then you will be able to edit and move them around.
32005 Exclamation,Times must be entered in 24-hour clock format:\n\nEg. 08:34 is 8:34am\n\nMidnight is 00:00, up to 23:59 for one minute to midnight.
32006 Exclamation,This area is for viewing previous conversation notes only. You can't edit historical data.
32007 Tables,If you have a large inventory of products, organise them into groups using these tables.\n\nDouble-click on a tab to edit its name.
32008 PageNumberPos,Use the cursor keys to move the position of the page number box. Press Enter when you are done.
32009 FilingSplitBar,To change the width of your Filing tree, move the mouse to this area and drag.\n\nIf you resize the Filing window, the width of the tree will also change by the same factor.
32010 Exclamation,These characters cannot be used as part of a file or folder name:\n\n|!506
32011 DoubleClick,You only need to click these once!
32012 CantEditInTree,To change a Phonebook file name, right-click on it and choose '|í2102' from the pop-up menu.
32013 BetweenBoxes,Position the mouse between two boxes. The pointer will change to indicate whether a right-click will delete or insert a box.
32014 ClickDontDrag,Click the tile which you want to move, don't drag it.
32015 PuzzleInTaskbar,Move the tiles by clicking on the tile which you want to move, and it will slide into the empty space.\n\nTo see what the completed picture looks like, right-click on any tile and choose '|í2142'.
32016 Exclamation,To find the person you want to call, click one of these phone lines to open the Find window.
32017 ,Click each box in turn to specify the tab order.
32018 ,Type the text which you want to search for and hit Enter. To interrupt the search, press Escape.
32019 AreaCode,Enter your local area code as you would dial it from elsewhere within your country.\n\nEg. For Birmingham, enter 0121
32020 RightClick,Double-Click to select an alarm sound.\nRight-Click to hear a preview of the selected sound.
32021 Exclamation,You must open a TCM module such as the Filing Cabinet before performing a search.
32022 Exclamation,There are no sub-folders within this folder!
32023 Edit,The blue text is the sign-off for your e-mail. It will appear by default whenever you create a new e-mail.\nTo change or delete it, simply edit it as normal text.
32024 Note,Use the control code ^x to include the folder number in the folder names.\n\nFor example:\n Folder name 'Week ^x'\nwill produce folders called\n 'Week 1', 'Week 2' etc.
32025 Note,Enter a value between 2 and 60.
32026 Postcode,Sorry - This postcode could not be found in the database.\n\nCheck that haven't mistaken a zero for the letter O.
32027 Clipboard,A copy of this data is now on the Windows Clipboard. Use Edit Paste in your application to access the data.
32028 Drag,Use the mouse to drag the templates that you want to see above the divider bar. To hide templates, drag them below the bar.
32029 Exclamation,You can only type numbers into this box.
32030 Mouse,Hold the mouse button down instead of repeated clicking!
32031 Note,This folder is already listed and will not be added.
